Cisco WIRELESS-G WBP54G - Manual (Page 19)

14 Chapter 4: Setting Up and Connecting the Wireless-G Bridge for Phone Adapters
Running the Setup Wizard
Wireless-G Bridge for Phone Adapters
13. If the phone adapter or IP phone is in a different room, disconnect the power adapter from the electrical
outlet. Move the power adapter and Bridge to the location of the phone adapter or IP phone.
Click Next to proceed, or click Back to return to the previous screen.
14. Disconnect the Ethernet network cable from the phone adapter or IP phone.
You will use the combination Ethernet network and power cable attached to the Bridge. Connect the Ethernet
network cable of the Bridge to the phone adapter or IP phone.
Click Next to proceed, or click Back to return to the previous screen.
Figure 4-16: Disconnect the Power Adapter Screen
Figure 4-17: Disconnect the Network Cable from the
Phone Adapter Screen