CLIFFORD GP500 - Manual (Page 9)

Two- Point In ter nal Im mo bi li sa tion
Please be aware that the AutoArming feature has no effect on
Immobilisation. The system automatically immobilizes your vehicle’s starter
and ignition 30 seconds after engine shutdown or when you arm with the
remote control.
When you remotely disarm your GP500 system, the Immobilisation circuits
will automatically disengage. You then have 30 seconds in which to start the
engine (or turn the ignition switch to its “ON” position).
If more than 30 seconds pass, the immobilizer will automatically reactivate.
This will be visually indicated by the LED repeatedly flashing, but at a slower
rate than that of the normal rapid “armed” indication flash rate.
To dis arm the Im mo bi lizer if it has armed itself, use the
re mote con trol to arm and then disarm the system, or
turn on the ignition and press button I on the remote
control.
Us er’s Man ual/299 7