CLIFFORD GP500 - Manual (Page 8)

ACG-2™ (Anti- CodeGrabbing 2™)
Clifford’s ACG-2 protects your motorcycle from thieves’ remote control
“cloning” devices that are used to record the disarming code transmitted
from your remote.
Auto matic re mote con trol low- battery warn ing
If your remote control battery is very low, you will hear five rapid chirps when
you disarm rather than the single chirp that you normally hear.
Re mote con trol bat tery re place ment
Any Authorized Clifford Dealer will be happy to replace a remote control
battery for you without cost provided you purchase the replacement battery
at their shop (it’s also a good idea to keep a spare battery on-hand just in case).
1. Insert a small, thin screwdriver blade in the slot near the keyring opening
(you may leave the keyring in place) and turn it to separate the two
halves.
2. Remove the old battery noting the + and – indications and replace it.
3. Put the enclosure back together by first aligning the top of the remote,
then snapping the case back together at the bottom.
6 GP500