Dell Compellent Series 40 - Manual (Page 388)

380 Storage Center 5.5 System Manager User Guide
IO Card Changes
I/O Card Change Wizard
The IO Card Change Wizard is used to configure IO card hardware changes on a per-port
basis after physical IO card changes have been made. The wizard requires Administrator
privileges. The wizard can be launched in the following ways:
• The Storage Center will launch the wizard automatically if an IO card change is detected
upon startup.
• You can launch the wizard from an Alert generated when an IO card change is detected.
• A separate menu option allows you to launch the wizard at any time. This option is useful
when an IO card change cannot be automatically detected by the system; for example,
if an IO slot was previously occupied by the same IO card type.
Figure 307. Configure IO Card Changes Menu Option
Note For more information about the IO Card Change Wizard, refer to:
Storage Center 5.4 IO Card Change Wizard (685-001-001). This document is
available only through Dell Support Services.