Using system restore, Creating a restore point – Dell Dimension 2350 User Manual
Page 6
2.
In the Control Panel window, under Pick a Category, click Performance and Maintenance.
3.
In the Performance and Maintenance window, click System.
4.
In the System Properties screen, click the Hardware tab.
5.
Click Device Manager.
6.
In the Device Manager window, right-click the device for which the new driver was installed, and then click Properties.
7.
Click the Drivers tab.
8.
Click Roll Back Driver.
If Device Driver Rollback does not resolve the problem, then use
to return your operating system to the operating state it was in before you
installed the new driver.
Using the Dell Dimension ResourceCD
If using
does not resolve the problem, then reinstall the driver from the Dell Dimension ResourceCD:
1.
With the Windows desktop displayed, insert the ResourceCD into the CD or DVD drive.
If this is your first time to use the ResourceCD, go to
.
2.
When the ResourceCD installation program starts, follow the prompts on the screen.
3.
When the InstallShield Wizard Complete window appears, remove the ResourceCD and click Finish to restart the computer.
4.
When you see the Windows desktop, reinsert the ResourceCD into the CD or DVD drive.
5.
At the Welcome Dell System Owner screen, click Next.
A message stating that the ResourceCD is detecting hardware in your computer appears.
The drivers that are used by your computer are automatically displayed in the My Drivers—The ResourceCD has identified these components in your
system window.
6.
Click the driver that you want to reinstall and follow the instructions on the screen.
If a particular driver is not listed, then that driver is not required by your operating system.
Using System Restore
The Microsoft® Windows® XP operating system provides System Restore to allow you to return your computer to an earlier operating state (without affecting
data files) if changes to the hardware, software, or other system settings have left the computer in an undesirable operating state. See Windows Help for
information on using System Restore.
Creating a Restore Point
1.
Click the Start button and click Help and Support.
2.
Click System Restore.
3.
Follow the instructions on the screen.
Restoring the Computer to an Earlier Operating State
If problems occur after you install a device driver, use
to resolve the problem. If that is unsuccessful, then use System Restore.
1.
Click the Start button, point to All Programs® Accessories® System Tools, and then click System Restore.
2.
Ensure that Restore my computer to an earlier time is selected and click Next.
3.
Click a calendar date to which you want to restore your computer.
The Select a Restore Point screen provides a calendar that allows you to see and select restore points. All calendar dates with available restore points
appear in bold.
4.
Select a restore point and click Next.
If a calendar date has only one restore point, then that restore point is automatically selected. If two or more restore points are available, click the
restore point that you prefer.
HINT:
The ResourceCD displays drivers only for hardware that came on your computer. If you installed additional hardware, the drivers for the new
hardware might not be displayed by the ResourceCD. If those drivers are not displayed, exit the ResourceCD program. For drivers information, see the
documentation that came with the device.
NOTICE:
Make regular backups of your data files. System Restore does not monitor your data files or recover them.
NOTICE:
Before you restore the computer to an earlier operating state, save and close all open files and close all open programs. Do not alter, open, or
delete any files or programs until the system restoration is complete.