Dell Inspiron 14z (1470, Mid 2009) - Manual (Page 96)

96 System Setup Utility
Boot Sequence
This feature allows you to change the boot sequence for devices.
Boot Options
• Removable Drive — The computer attempts to boot from the removable
drive. If no operating system is on the drive, the computer generates an
error message.
• Hard Drive — The computer attempts to boot from the primary hard
drive. If no operating system is on the drive, the computer generates an
error message.
• CD/DVD/CD-RW Drive — The computer attempts to boot from the
CD/DVD/CD-RW drive. If no CD/DVD/CD-RW is in the drive, or if the
CD/DVD/CD-RW has no operating system, the computer generates an
error message.
• USB Storage Device — Insert the memory device into a USB connector
and restart the computer. When F12 Boot Options appears in the
lower-right corner of the screen, press . The BIOS detects the
device and adds the USB flash option to the boot menu.
NOTE: To boot to a USB device, the device must be bootable. To ensure that
your device is bootable, check the device documentation.
4th Boot Priority Specifies the boot sequence from the available
devices
Removable Drive; Hard Drive; USB Storage
Device; CD/DVD/CD-RW Drive; Network;
Disabled (Network by default)
5th Boot Priority Specifies the boot sequence from the available
devices
Removable Drive; Hard Drive; USB Storage
Device; CD/DVD/CD-RW Drive; Network;
Disabled (USB Storage Device by default)
Exit
Exit Options Provides options to Save Changes and Reset,
Discard Changes and Reset, Restore Defaults,
Discard Changes and Save Changes