Camera module, Removing the camera module, Removing the camera module" on – Dell Inspiron 14z (1470, Mid 2009) User Manual
Page 65
Camera Module
65
14
Camera Module
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your
computer. Damage due to servicing that is not authorized by Dell is not covered by
your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist
grounding strap or by periodically touching an unpainted metal surface (such as a
connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery
(see "Removing the Battery" on page 13) before working inside the computer.
Removing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery. See "Removing the Battery" on page 13.
3 Remove the module cover. See "Removing the Module Cover" on page 15.
4 Follow the instructions in step 4 to step 5 of "Removing the Optical Drive"
5 Remove the keyboard. See "Removing the Keyboard" on page 31.
6 Remove the palm-rest assembly. See "Removing the Palm-Rest Assembly"
7 Remove the display assembly. See "Removing the Display Assembly" on
8 Remove the display bezel. See "Removing the Display Bezel" on page 50.
9 Remove the display panel. See "Removing the Display Panel" on page 51.
10 Lift the camera cable off the adhesive tapes on the display cover.