Intel fast call for help, Intel® fast call, Requirements – Dell OptiPlex 960 (Late 2008) User Manual

Page 28: Putting it all together, Initiating intel fast call for help

Intel® Fast Call

Intel® Fast Call for help is a feature that is available for VPro SKUs. An Intel Fast Call for help connection allows the end user

to request assistance if the VPro system is outside the corporate network. If the BIOS allows an Intel Fast Call for help

connection the user can press the hot key/button () while the system is loading to initiate an Intel Fast Call

connection.

Requirements

Before an Intel Fast Call connection can be established from the Operating System the VPro system must have:

1. Environment detection enabled

2. Remote Connection policy

3. Management Presence Server (MPS)

Putting it all Together

There are no settings in the MEBX to enable/disable Intel Fast Call for help. If the system supports Full VPro Intel Fast Call for

help will be available for use. If the system only supports Intel Standard Manageability Intel Fast call for help is not enabled.

1. Before an Intel Fast Call for help can be started, environment detection must be enabled. This allows Intel AMT to

determine if the system is within the corporate network. This is configured through an ISV app.

2. A remote connection policy must be created before an Intel Fast call for help can be initiated. The policy for the BIOS

initiated call does not need to be configured, but another policy must exist before initiating a help call from the BIOS.

The BIOS must support the hot key that initiates the Intel Fast call for help.

3. A management presence server must exist to answer the Intel fast calls for help. The management presence server

resides in the DMZ zone. The management presence server.

When all of these conditions are satisfied the system is able to initiate an Intel Fast Call for help.

Initiating Intel Fast Call for Help

Once the feature has been fully configured, there are three methods for initiating an Intel Fast Call for help session. These

include:

At the Dell splash screen press .

At the Dell splash screen press for the One Time Boot Menu.

Select the last option titled Intel Fast Call for Help.

From Windows:

1. Launch the Intel AMT privacy icon/application Intel Management Security Status.

2. Switch to the Intel AMT tab.

3. In the Remote Connectivity box, click Connect.

* Information on this page provided by