Intel amt in dhcp mode settings example, Intel amt in static mode settings example – Dell OptiPlex 960 (Late 2008) User Manual

Page 26

Intel AMT in DHCP Mode Settings Example

The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer

in DHCP mode.

Intel AMT Configurations Example in DHCP Mode

Intel AMT Configuration Parameters

Values

Intel AMT Configuration

Select and press .

Host Name

Example: IntelAMT

This is the same as the operating system machine name.

TCP/IP

Set the parameters as follows:

Enable Network interface

Enable DHCP Mode

Set a domain name (e.g., amt.intel.com)

Provision Model

Intel AMT 4.0 Mode

Small Business

SOL/IDE-R

Enable SOL

Enable IDE-R

Remote FW Update

Enabled

Save and exit MEBx and then boot the computer to the Windows® operating system.

Intel AMT in Static Mode Settings Example