Dell OptiPlex 960 (Late 2008) User Manual

Page 27

The table below shows a basic field settings example for the Intel AMT Configuration menu page to configure the computer

in static mode. The computer requires two MAC addresses (GBE MAC address and Manageability MAC Address) to operate in

static mode. If there is no Manageability MAC address, Intel AMT cannot be set in static mode.

Intel AMT Configurations Example in Static Mode

Intel AMT Configuration Parameters

Values

Intel AMT Configuration

Select and press

Host Name

Example: IntelAMT

TCP/IP

Set the parameters as follows:

Enable Network interface

Disable DHCP Mode

Set an IP address (e.g., 192.168.0.15)

Set a subnet mask (e.g., 255.255.255.0)

The default gateway address is optional

The preferred DNS address is optional

The Alternate DNS address is optional

Set the domain name (e.g., amt.intel.com)

Provision Model

Intel AMT 4.0 Mode

Small Business

SOL/IDE-R

Enable SOL

Enable IDE-R

Remote FW Update

Enabled

Save and exit MEBx and then boot computer to the Windows operating system.

Information on this page provided by