Dell Inspiron 20 (3048, Early 2014) - Manual (Page 55)

Replacing the Power-Adapter
Port
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Slide the power-adapter port into the bracket on the display-panel base.
2 Align the screw hole on the power-adapter port with the screw hole on
the bracket on the display-panel base.
3 Replace the screw that secures the power-adapter port to the bracket on
display-panel base.
4 Route the power-adapter port cable on the system board and connect
the cable to the system board.
Post-requisites
1 Replace the VESA-mount bracket .
2 Replace the system-board shield .
3 Replace the back cover .
4 Follow the procedure from step 3 to step 5 in “Replacing the Stand
Assembly ”.
55