Dell Inspiron 20 (3048, Early 2014) - Manual (Page 26)

Removing the Optical Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1 Follow the procedure from step 1 to step 5 in “Removing the Stand
Assembly ”.
2 Remove the back cover .
Procedure
1 Remove the screw that secures the optical-drive assembly to the display-
panel base.
2 Push the optical-drive bracket to disconnect the optical-drive assembly
and then slide the optical-drive assembly out of the optical-drive bay.
1 optical-drive assembly 2 optical-drive bracket
3 screw
26