Dell Inspiron 20 (3048, Early 2014) - Manual (Page 28)

Replacing the Optical Drive
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the optical-drive bracket with the screw holes
on the optical drive.
2 Replace the screws that secure the optical-drive bracket to the optical
drive.
3 Align the tabs on the optical-drive bezel with the slots on the optical-
drive assembly and snap the optical-drive bezel into place.
4 Slide the optical-drive assembly into the optical-drive bay until it is fully
seated.
5 Replace the screw that secures the optical-drive assembly to the display-
panel base.
Post-requisites
1 Replace the back cover .
2 Follow the procedure from step 3 to step 5 in “Replacing the Stand
Assembly ”.
28