Dell S520 Projector User Manual

Page 46

Using Your Projector

LAN S

ETTINGS

—

Select and press

to activate LAN settings. The LAN

settings menu provides the following options:

IRELESS

LAN—Select Enabled to activate the Wireless and LAN

function.

DHCP—If a DHCP server exists in the network to which the projector
is connected, the IP address will automatically be acquired when you
select DHCP On. If DHCP is Off, manually set the IP Address, Subnet
Mask, and Gateway. Use

and

to select the number of IP

address, Subnet Mask, and Gateway. Key in enter to confirm each
number and then use

and

to set the next item.

IP A

DDRESS

—Automatically or manually assigns the IP address to the

projector connected to the network.

UBNET

ASK

—Configure the Subnet Mask of the network connection.

ATEWAY

—Check the Gateway address with your network/system

administrator if you configure it manually.

DNS—Check the DNS Server IP address with your network/system
administrator if you configure it manually.

TORE

—Press

to save the changes made in network configuration

settings.

NOTE:

Use

and

button to select IP Address, Subnet Mask,

Gateway, DNS, and Store.

Press the

button to enter IP Address, Subnet Mask,

Gateway or DNS to set the value. (The selected option is
highlighted in blue)

Use

and

button to select the option.

Use

and

button to set the value.

After the setup is complete, press the

button to exit.