Dell S520 Projector - Manual (Page 43)

Using Your Projector 43
•Origin — Select Origin to maintain the aspect ratio of image projector
according to the input source.
•16:10 — The input source scales to fit the width of the screen to
project a 16:10 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3
image.
Z OOM —Press and to zoom and view the image.
Adjust the image scale by pressing or
and press to view on your remote
control only.
Z
OOM
N
AVIGATION
— Press to activate the
Zoom Navigation menu.
Use to navigate the projection
screen.
3D F ORMAT —Allows you to select the 3D format. Options are: Side By
Side, Side By Side Full, Frame Sequential, Field Sequential, Top/Bottom,
and Top/Bottom Full.
3D S YNC I NVERT —If you see a discrete or overlapping image while
wearing DLP 3D goggles, you may need to execute 'Invert' to get
best match of left/right image sequence to get the correct image.
(For DLP 3D goggles)
NOTE:
1 When you want to create a 3D experience, you will need a
few other components including:
a "Active" 3D glasses with DLP Link™.
b 3D content. See "Note 2".
c 3D Player.
2 HDMI 1.4a 3D support and refresh rate are as below:
a 1280x720p@50 Hz Frame Packing
b [email protected]/60 Hz Frame Packing
c [email protected]/24 Hz Frame Packing
d 1920x1080i@50 Hz Side by Side Half
e [email protected]/60 Hz Side by Side Half
f 1280x720p@50 Hz Top and Bottom
g [email protected]/60 Hz Top and Bottom