Palm rest, Installing the video card – Dell Inspiron 1100 User Manual
Page 21
5.
Pull straight up on the attached pull-tab to lift the video card off of the system board.
Installing the Video Card
1.
Align the posts on the video card with the screw holes in the system board.
2.
Press down on the two areas on the video card that are labeled "PUSH" until you feel the video card click into place.
3.
Replace the two M2.5 x 8-mm screws.
Palm Rest
1.
Follow the instructions in "
Preparing to Work Inside the Computer
."
2.
Remove the
hard drive
.
3.
Remove the
CD or DVD drive
.
4.
Remove the
keyboard
.
5.
Remove the
6.
Remove the
display assembly
.
7.
Turn the computer over and remove the twelve M2.5 x 8-mm screws (not labeled).
8.
Remove the M2.5 x 4-mm screw from the battery bay.
1 pull-tab
2 video card
3 M2.5 x 8-mm screws (2)
CAUTION:
Before performing the following procedures, read the safety instructions in your Owner's Manual.
CAUTION:
To prevent static damage to components inside your computer, discharge static electricity from your body before you touch any of
your computer's electronic components. You can do so by touching an unpainted metal surface.