Dell Dimension 9200c - Manual (Page 49)

Removing and Installing Parts: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
1. Follow the procedures in Before You Begin .
2. Remove the CD/DVD drive, if installed (see Removing a CD/DVD Drive ).
3. Gently slide the floppy drive into place until you hear a click or feel the drive securely installed.
4. Attach the interface cable to the system board (see System Board Components ).
1 cable release tab 2 interface cable edge connector 3 interface cable
5. Check all cable connections, and fold cables out of the way to avoid blocking the fan and cooling vents.
6. Replace the CD/DVD drive (see Installing a CD/DVD Drive ).