Removing and installing parts, Memory – Dell Dimension 9200c User Manual
Page 35
Removing and Installing Parts: Dell Dimension 9200C Service Manual
file:///T|/htdocs/systems/dim9200C/en/SM_EN/parts.htm[10/31/2012 8:07:53 AM]
Removing and Installing Parts
Dell™ Dimension™ 9200C Service Manual
Memory
You can increase your computer memory by installing memory modules on the system board.
Your computer supports unbuffered, non-ECC, DDR2 memory.
NOTE:
Buffered memory is not supported on this computer.
DDR2 Memory Overview
DDR2 memory modules should be installed in pairs of matched memory size, speed, and technology. If the DDR2 memory
modules are not installed in matched pairs, the computer will continue to operate, but with a slight reduction in performance.
See the label on the module to determine the module capacity.
NOTE:
Always install DDR2 memory modules in the order indicated on the system board.
The recommended memory configurations are:
A pair of matched memory modules installed in DIMM connectors 1 and 2 (white securing clips)
or
A pair of matched memory modules installed in DIMM connectors 1 and 2 and another matched pair installed in DIMM
connectors 3 and 4 (black securing clips)
NOTICE:
Do not install ECC memory modules.
If you install mixed pairs of DDR2 800-MHz (PC2-6400) and DDR2 533-MHz (PC2-4300) memory, the modules function
at the speed of the slowest module installed.