Dell PERC 4/im User Manual
Page 14
Information
Display Mode
[Terse/Verbose]
To display minimum information, specify Terse mode.
To display detailed information, specify Verbose mode
(default).
Video Mode
Configuration
[Color/Monochrome]
Specifies the default video mode for the SCSI BIOS Configuration
Utility. The monochrome setting enhances readability on a
monochrome monitor. The default value is Color.
Restore
Defaults
Executable
Press Enter to obtain default settings.
1
The boot alert only applies to the four adapters in the boot order list. A boot alert occurs when the user adds
a new adapter and the system BIOS scans the new adapter first. The alert also occurs when the user removes
any of the adapters.
Exiting the Fusion-MPT SCSI BIOS Configuration Utility
The Exit menu for the Fusion-MPT SCSI BIOS Configuration Utility is used for all five of the menus listed above.
However, the available functionality is different for the Main menu and the four subordinate menus.
To exit from the Adapter Properties, Device Properties, Boot Adapter List, or Global Properties menus, use
these exit options:
Cancel exit
Returns you to the previous menu.
Save changes then
exit this menu
Implements any changes you made on the previous menu and returns you to the Main
menu.
Discard changes
then exit this
menu
Restores the default settings and returns you to the Main menu.
To exit from the Main menu, use these exit options:
Cancel exit
Returns you to the Main menu.
Exit the Configuration
Utility
Exits the configuration and automatically reboots your system.
NOTE: If you reboot the system without properly exiting from this utility, some changes may not take
effect.
Please read all