Dell PERC 4/im User Manual
Dell Computer hardware

The information below is provided by the supplier of the referenced device without independent verification by Dell and is subject to
the
noted below.
Integrated Mirroring Guide: Dell™ PowerEdge Expandable RAID
Controller 4/im;
Integrated Mirroring™ Guide
Integrated Mirroring (IM ) Overview
Fusion_MPT SCSI BIOS and Configuration Utility
Common Information Model (CIM) Solution
Information in this document is subject to change without notice.
© 2002 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text:
Dell, the DELL logo, PowerEdge, and Dell OpenManage are trademarks and DellWare is a registered service mark, of Dell
Computer Corporation.
MegaRAID is a registered trademark of LSI Logic Corporation.
Microsoft, Windows, Windows NT, and MS-DOS are registered trademarks of Microsoft Corporation.
Intel is a registered trademark of Intel Corporation.
Novell and NetWare are registered trademarks of Novell, Inc.
ASPI is a registered trademark of Adaptec, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or
their products. Dell Computer Corporation disclaims any proprietary interest in trademarks and trade names other than its own.
Restrictions and Disclaimers
The information contained in this document, including all instructions, cautions, and regulatory approvals and certifications, is
provided by the supplier and has not been independently verified or tested by Dell. Dell cannot be responsible for damage caused
as a result of either following or failing to follow these instructions.
All statements or claims regarding the properties, capabilities, speeds or qualifications of the part referenced in this document are
made by the supplier and not by Dell. Dell specifically disclaims knowledge of the accuracy, completeness or substantiation for any
such statements. All questions or comments relating to such statements or claims should be directed to the supplier.
Initial release: ?
Part Number: ?
Model ?