Dell POWEREDGE M915 - Manual (Page 22)

22
Information Update
1 Open the hard-drive carrier handle. See Figure 1-4.
Figure 1-4. Installing a Hard Drive
2 Insert the hard-drive carrier into the drive bay. Carefully align the channel
on the hard drive carrier with the appropriate drive slot on the blade.
3 Push the drive carrier into the slot until the handle makes contact with
the blade.
4 Rotate the carrier handle to the closed position while pushing the carrier
into the slot until it locks into place.
The status LED indicator displays a steady green light if the drive is
installed correctly. The drive carrier LED green indicator flashes as the
drive rebuilds. If the drive carrier LED does not light, see "Troubleshooting
SAS and SATA Drives" in your Hardware Owner’s Manual.
1 hard drive 2 carrier handle
3 release button
3
2
1