Dell B1163 Multifunction Mono Laser Printer - Manual (Page 121)

Wireless network setup
121 2. Using a Network-Connected Machine
4 Select New Printer.
5 Select Wireless.
6 The software searches the wireless network.
If the software has failed to search the network, check if the USB cable is
connected properly between the computer and machine, and follow the
instruction in the window.
7 After searching the wireless networks, a list of wireless networks your
machine has searched appears.
Then, click (Plus) button.
8 The window showing the wireless network setting appears. Check the
settings and click Next.
• Enter the wireless Network Name: Enter the SSID name you want (SSID
is case-sensitive).
• Operation Mode: Select ad hoc.
• Channel: Select the channel. (Auto Setting or 2412 MHz to 2467 MHz).
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption may or may
not be used, depending on the need for data security.
Shared Key: Authentication is used. A device that has a proper WEP key
can access the network.
• Encryption: Select the encryption (None, WEP64, WEP128).
• Network Key: Enter the encryption network key value.