Figure 1-5, Figure 1-5, both, Figure 1-5 with – Dell PowerVault NX1950 User Manual

Page 16

Introduction

Figure 1-5. Non-Redundant iSCSI Paths Using Four NICs

• For more information about the pre-requisites to configure the PowerVault

NX1950 cluster solution as an iSCSI Target, see the section

Creating a

Highly Available iSCSI Target in Dell PowerVault NX1950 Cluster Systems

Installation and Troubleshooting Guide on the Dell Support website at

support.dell.com.

NOTE:

Before you configure the PowerVault NX1950 cluster solution as an

iSCSI Target, turn off the firewall in all cluster nodes to ensure proper iSCSI

Target configuration.

For more information about PowerVault NX1950 storage solutions, see the

Dell PowerVault NX1950 Systems Support Matrix located at the Dell

Support website at

support.dell.com.

public network

host

(Initiator

PowerVault NX1950 storage system

with NIC teaming (cluster node)

PowerVault NX1950 storage system

with NIC teaming (cluster node)

host

(Initiator

teamed NICs

for public

network

iSCSI network

heartbeat

network

switch

NIC teaming