Dell Inspiron Small Desktop (3647, Late 2013) - Manual (Page 38)

38 | Replacing the Power-Button Module
Replacing the Power-Button Module
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 7. After working inside your computer, follow the instructions in
"After Working Inside Your Computer" on page 9. For more safety best practices,
see the Regulatory Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align and push the power-button module tabs into the slots on the front panel.
2 Align the power-button module cable on the routing guides on the chassis.
3 Connect the power button module cable to the system board connector (LEDH1).
See "System-Board Components" on page 11.
Postrequisites
1 Replace the drive cage. See "Removing the Drive Cage" on page 26.
2 Replace the front bezel. See "Replacing the Front Bezel" on page 25.
3 Replace the fan shroud. See "Removing the Fan Shroud" on page 14.
4 Replace the computer cover. See "Replacing the Computer Cover" on page 13.
book.book Page 38 Monday, November 25, 2013 3:53 PM