Dell D/Port Advanced Port Replicator - Manual (Page 11)

NOTICE: Do not pick up the computer or the APR when the computer is docked. Doing so can damage the connectors
on the computer and on the APR.
Dell Diagnostics
The Dell Diagnostics that came with your Dell computer includes tests that help you troubleshoot the controllers in your APR.
The subtests in the Network Interface test group of the Dell Diagnostics verify the basic operation of the network controller in
the APR.
The subtests in the Serial/Infrared Ports test group check the basic operation of the APR Serial/Infrared ports. The subtests in
this test group are not intended as a diagnostic test for the external device itself.
The subtests in the USB test group check the basic operation of the external devices (such as a mouse). The subtests in this
test group are not intended as a diagnostic test for the external device itself.
For complete instructions on using the Dell Diagnostics, see the documentation that came with your computer.
Specifications
Physical
Height:
53 mm (2.09 inches)
Depth: 142 mm (5.59 inches)
Width: 276 mm (10.87 inches)
I/O Connectors
Serial (DTE)
one 9-pin connector, 16550-compatible,
16-byte buffer
Parallel one 25-pin unidirectional, bidirectional, or
ECP connector
PS/2 two 6-pin mini-DIN connectors
Video :
Digital video interface (DVI) one 24-pin connector
VGA one 15-pin connector
Power
AC Adapter Input:
Voltage 100–240 VAC, 50–60 Hz
Amperage up to 1.5 A
Back to Contents Page