Using your superdisk drive, Inserting a diskette, Ejecting a diskette – Compaq 1800 Series User Manual
Page 41
3-16 Mobile Internet PC Features
Using Your SuperDisk Drive
For optimum performance, use Imation SuperDisk diskettes with your SuperDisk
drive.
Inserting a Diskette
To insert a 1.44-MB or SuperDisk diskette into the drive, complete the following
steps:
1.
Turn on your computer, if it is not already turned on.
2.
Hold the diskette, label side up, and gently insert the diskette into the drive.
After you insert a diskette, it will take a few seconds for the drive to read the
diskette before you can use it.
+
NOTE: The SuperDisk Drive Diskette Eject button is motorized and does not pop out
after inserting a diskette.
Ejecting a Diskette
Because the SuperDisk drive has a motorized Diskette Eject button, your
computer must be turned on to eject a diskette. Do not turn off your computer until
the diskette has been ejected.
The diskette will not eject if the computer is still writing to the diskette.
To eject a diskette, complete the following steps:
1.
Push the Diskette Eject button. The diskette will eject from the drive.
2.
Remove the diskette from the drive.
OR
From the Windows desktop, double-click the My Computer
G
icon.
3.
Right-click the 3½ Floppy (A:)
H
H
H
H
icon, then select Eject. The diskette will
eject from the drive.