Dell Latitude Z (Late 2009) - Manual (Page 35)

Removing the Display Assembly Hinges
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the battery from the computer.
3. Remove the hinge covers from the computer.
4. Remove the access panel from the computer.
5. Remove the display bezel from the computer.
6. Remove the display panel from the display assembly.
7. Remove the display assembly from the computer and set the display assembly on a clean, flat workspace.
8. Remove the screws that secure the right display hinge to the display assembly.
9. Lift the display hinge from the display assembly.
10. Unthread any wires and remove the first display hinge.
11. Repeat the above steps to remove the second display hinge.
12. Lift the second display hinge from the display assembly.
Replacing the Display Assembly Hinges
To replace the display assembly hinges, perform the above steps in reverse order.
Back to top
Back to Contents Page