Dell Alienware M14x R2 (Early 2012) - Manual (Page 74)

Replacing the Display Assembly
Procedure
1 Slide the WirelessHD (optional) and mini-card antenna cables through
the slot on the computer base.
2 Place the display assembly in position and replace the screws that secure
the display assembly to the computer base.
NOTE: Ensure that no cables lie between the display assembly and the computer
base.
3 Connect the display cable and the logo-board cable to the connectors on
the system board.
Postrequisites
1 Replace the palm-rest assembly.
See "Replacing the Palm-Rest Assembly" on page 44.
2 Replace the keyboard. See "Replacing the Keyboard" on page 39.
3 Replace the center-control cover.
See "Replacing the Center-Control Cover" on page 35.
4 Turn the computer over and route the WirelessHD card and mini-card
antenna cables through the routing guides on the computer base.
5 Connect the Mini-Card antenna cables to the mini-card(s).
See "Replacing the Mini-Card(s)" on page 47.
6 Replace the battery. See "Replacing the Battery" on page 18.
7 Replace the base cover. See "Replacing the Base Cover" on page 16.
8 Follow the instructions in "After Working Inside Your Computer" on page13.
Display Assembly 76