Display cable, Removing the display cable, Replacing the display cable – Dell Latitude 2110 (Mid 2010) User Manual
Page 17
Back to Contents Page
Display Cable
Dell Latitude 2110 Service Manual
Removing the Display Cable
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the
battery
.
3.
Remove the
keyboard
.
4.
Remove the
access panel
.
5.
Remove the
display assembly
.
6.
Remove the
display bezel
.
7.
Remove the
display panel
.
8.
Disconnect the camera cable from the display assembly.
9.
Disconnect the display LED board cable from the display assembly.
10.
Remove the grounding captive screw from the display hinge.
11.
Remove the display cable from the display assembly.
Replacing the Display Cable
To replace the display cable, perform the above steps in reverse order.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
NOTE:
You may need to install Adobe Flash Player from Adobe.com in order to view the illustrations below.