Dell Dimension 9150/XPS 400 - Manual (Page 31)

Setting Up and Using Your Computer
31
8 Select the desired capacity for the volume, and press . The default value is the
maximum available size.
9 Press to create the volume.
10 Press to confirm that you want to create the RAID volume.
11 Confirm that the correct volume configuration is displayed on the main Intel
®
RAID Option
ROM utility screen.
12 Press the up- and down-arrow keys to select Exit, and press .
13 Install the operating system (see "Using Microsoft
Windows XP System Restore" on page 60).
Creating a RAID Level 1 Configuration
1 Set your computer to RAID-enabled mode (see page 30).
2 Press when you are prompted to enter the Intel RAID Option ROM utility.
3 Use the up- and down-arrow keys to highlight Create RAID Volume, and press .
4 Enter a RAID volume name or accept the default, and press .
5 Use the up- and down-arrow keys to select RAID1(Mirror), and press .
6 If there are more than two hard drives available, press the up- and down-arrow keys and
spacebar to select the two drives you want to use to make up your volume, and then press
.
7 Select the desired capacity for the volume, and press . The default value is the
maximum available size.
8 Press to create the volume.
9 Press to confirm that you want to create the RAID volume.
10 Confirm that the correct volume configuration is displayed on the main Intel RAID Option
ROM utility screen.
11 Use the up- and down-arrow keys to select Exit, and press .
12 Install the operating system (see "Using Microsoft
Windows XP System Restore" on page 60).
Deleting a RAID Volume
NOTE:
When you perform this operation, all data on the RAID drives will be lost.
NOTE:
If your computer currently boots to RAID and you delete the RAID volume in the Intel RAID Option
ROM utility, your computer will become unbootable.
1 Press when you are prompted to enter the Intel RAID Option ROM utility.
2 Use the up- and down-arrow keys to highlight Delete RAID Volume, and press .
3 Use the up- and down-arrow keys to highlight the RAID volume you want to delete, and press
.