Dell PowerVault NX3300 - Manual (Page 13)

Memory indicator
Condition Corrective Action
The indicator blinks amber if a
memory error occurs. See the system event log or system messages for the location of the failed
memory. Reinstall the memory device. If the problem persists, see
Getting
Help.
Hard-Drive Indicator Patterns
Figure 3. Hard-Drive Indicators
1. hard-drive activity indicator (green)
2. hard-drive status indicator (green and amber)
NOTE: If the hard drive is in Advanced Host Controller Interface (AHCI) mode, the status indicator (on the right side)
does not function and remains off.
Drive-Status Indicator Pattern (RAID Only) Condition
Blinks green two times per second Identifying drive or preparing for removal
Off Drive ready for insertion or removal
NOTE: The drive status indicator remains off until all hard drives
are initialized after the system is turned on. Drives are not ready
for insertion or removal during this time.
Blinks green, amber, and off Predicted drive failure
Blinks amber four times per second Drive failed
Blinks green slowly Drive rebuilding
Steady green Drive online
Blinks green three seconds, amber three
seconds, and off six seconds Rebuild aborted
13