Removing the power-button board, Prerequisites, Procedure – Dell Inspiron 17 (5748, Mid 2013) User Manual
Page 44

Removing the Power-Button
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Prerequisites
1
Remove the
.
2 Remove the
.
3 Follow the procedure from step 1 to step 3 in removing the
.
4 Follow the procedure from step 1 to step 2 in removing the
5 Remove the
6 Remove the
Procedure
1
Peel off the power-button board cable from the palm rest.
2 Turn the palm-rest assembly over and place it on a clean and flat surface.
3 Remove the power-button board cable through the slot on the palm rest
assembly.
4 Remove the screw that secures the power-button board to the palm rest.
5 Note the power-button board cable routing and peel it off the palm rest.
44