Enable wireless or lan on the projector – Dell 4320 Projector User Manual
Page 74

Enable Wireless or LAN on the Projector
1 Connect the power cable and turn on the projector by pressing the power
button.
2.1 If you choose the LAN connection mode, follow these steps to enable Wireless
and LAN function (default is Enabled): Advanced Settings
LAN Settings
Wireless and LAN
Enabled.
2.2 If you choose the wireless connection mode, follow these steps to enable
wireless connection (default is Connected): Advanced Settings
Wireless
Settings
Wireless
Connected.
NOTE:
If your want to use the wireless connection for 4220 or 4320 projector,
need installed the optional wireless dongle. See "Installing the Optional
Using Your Projector
74
This manual is related to the following products: