Dell 4320 Projector User Manual
Page 32
4 Up
/ Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
5 Right
/ Auto Adjust Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to synchronize the projector to the input
source.
NOTE:
Auto Adjust does not operate if the
on-screen display (OSD) is displayed.
6 IR Receiver
Point the remote control towards the IR receiver
and press a button.
7 Down
/ Keystone
adjustment
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to adjust image distortion caused by tilting
the projector (+40/-35 degrees).
8 Menu
Press to activate the OSD. Use the directional
keys and the Menu button to navigate through
the OSD.
9 Left
/ Source
Press to navigate through the On-Screen Display
(OSD) Menu items.
Press to toggle through Analog RGB, Composite,
Component (YPbPr via VGA), HDMI, and
S-Video sources when multiple sources are
connected to the projector.
10 Enter
Press to confirm the selection item.
Using Your Projector
32