Dell 4320 Projector - Manual (Page 43)

C OLOR T EMPERATURE — Allows you to adjust the color temperature. The
screen appears cooler at higher color temperatures and warmer at lower
color temperatures. When you adjust the values in the Color Adjust menu,
the Custom mode is activated. The values are saved in the Custom mode.
RGB C OLOR A DJUST — Allows you to manually adjust the colors red, green,
and blue.
S ATURATION — Allows you to adjust the video source from black and white
to fully saturated color. Press to increase the amount of color in the
image and to decrease the amount of color in the image.
S HARPNESS — Press to increase the sharpness and to decrease the
sharpness.
T INT — Press to increase the amount of green in the image and to
decrease the amount of green in the image (available for NTSC only).
W HITE I NTENSITY — Press and use and to display white intensity.
C OLOR S PACE — Allows you to select the color space. The options are: RGB,
YCbCr, and YPbPr.
VGA O UTPUT — Select On or Off the VGA output function at projector
standby status. Default is Off.
NOTE:
1 If you adjust the settings for Color Temperature, RGB Color Adjust,
Saturation, Sharpness, Tint, and White Intensity the projector
automatically switch to Custom mode.
2 Saturation, Sharpness, and Tint are only available when the input source is
from Composite or S-Video.
I MAGE S ETTINGS (N O I NPUT S OURCE )— Select and press to activate image
settings. The image settings menu provides the following options:
VGA O UTPUT — Select On or Off the VGA output function at projector
standby status. Default is Off.
Using Your Projector 43