Web interface installation and setup – Dell KVM 2161DS User Manual
Page 20
20
xxx
|
Installation
xxx
1
You will see the Main menu with eleven options. Select the option number
for Set Web Interface Ports to open the Web Interface Port
Configuration Menu.
2
Select option 1 to set the port numbers. Type the port numbers you wish to
use for the HTTP port and the HTTPS port.
3
If the values are correct for your network, type
key.
4
At the local user station, input the target device names.
Mouse Acceleration
If you are experiencing slow mouse response during a remote video session,
deactivate mouse acceleration in the operating system of the target device and
adjust mouse acceleration on each target device to Slow or None.
Web Interface Installation and Setup
Once you have installed a new appliance, you can use the web interface to
configure unit parameters and launch video sessions.
Supported Browsers
The web interface supports the following browsers:
•
Microsoft Internet Explorer® version 6.x SP1 or later
•
Firefox version 2.0 or later
Launching the On-board Web Interface
To launch the web interface:
1
Open a web browser and type the IP address of the appliance using the local
Web interface.