Enabling menus, Encrypting disk x/y xx% do not power off, Enter pin – Dell 5530/dn Mono Laser Printer User Manual
Page 145: Error reading usb drive, Flushing buffer, Formatting disk x/y xx% do not power off, Formatting flash do not power off, Hex trace ready, Insert staple cartridge, Encrypting disk x/y xx% do not power off
Enabling Menus
Wait for the message to clear.
Encrypting disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is encrypting the printer hard disk.
The percentage completed appears on the display.
Enter PIN
Enter the PIN you created in Print Properties when the confidential job was sent for printing.
Error reading USB drive
Remove the device and wait for the message to clear. The USB drive may be corrupted.
Flushing buffer
Wait for the message to clear.
Formatting Disk x/y XX% DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the printer hard disk.
The percentage completed appears on the display.
Formatting Flash DO NOT POWER OFF
Wait for the message to clear.
Warning—Potential Damage: Do not power off while the printer is formatting the flash memory.
Hex Trace Ready
The printer is in the Ready state, and Hex Trace is active. You can use Hex Trace to troubleshoot printer problems.
Insert staple cartridge
Try one or more of the following:
•
Insert a staple cartridge to clear the message.
•
Press to clear the message and print without using the staple feature.
Understanding printer messages
145