CITIZEN PD-24 - Manual (Page 33)

33
4
Setting the Modes
To enter one of the setting modes, press the relevant button whilst pulling the power switch
towards you:
Self print mode
1
With paper loaded, press and
hold the FEED button and
power switch.
After all the LED have lit up, the POWER
LED changes to flashing green.
After it changes, release all buttons.
Flashing (green)
2
Press the MENU button to
change the POWER LED from
flashing green to steady orange
and start self printing.
Steady (orange)
Even if the MENU button is pushed
during self print, self print will not be
done continuously.
To restart self print, press the FEED
button after printing is completed.
Example of printing in self print mode
3
Turn off the power to leave self
print mode.
Mode Button Combination
Print mode FEED button
(Self print mode, HEX dump print mode)
Menu setting mode MENU button
Interface setting mode FEED button + MENU button