Dell Inspiron 14z (N411z, Late 2011) - Manual (Page 67)

Camera Module 67
13 Disconnect the camera cable from the connector on the camera module.
Replacing the Camera Module
1 Follow the instructions in "Before You Begin" on page 9.
2 Connect the camera cable to the camera module, and adhere the tape that
secures the cable to the camera module.
3 Align the camera module to the alignment posts in the display cover and
place the camera module in the display cover.
4 Adhere the camera cable to the tapes on the display cover.
5 Replace the display panel. See "Replacing the Display Panel" on page 53.
1 camera cable 2 camera module
3 adhesive tape
2
1
3