Hinge cover, Removing the hinge cover – Dell Inspiron 14z (N411z, Late 2011) User Manual
Page 48

48
Display
4 Connect the camera cable. See "Replacing the Camera Module" on
5 Slide the display cable in the connector on the system board and press
down the latch to secure the cable.
6 Connect the antenna cables to the mini-card. See "Replacing the
7 Replace the palm-rest assembly. See "Replacing the Palm-Rest Assembly"
8 Replace the keyboard. See "Replacing the Keyboard" on page 33.
9 Turn the computer over.
10 Replace the two screws that secure the display assembly to the computer
base.
11 Follow the instructions from step 5 to step 6 in "Replacing the Optical
12 Replace the module cover. See "Replacing the Module Cover" on page 16.
13 Replace the battery. See "Replacing the Battery" on page 14.
CAUTION:
Before turning on the computer, replace all screws and ensure that no
stray screws remain inside the computer. Failure to do so may result in damage to
the computer.
Hinge Cover
Removing the Hinge Cover
CAUTION:
The hinge caps are extremely fragile. Be careful when removing the
hinge caps to prevent damaging them.
1 Follow the instructions in "Before You Begin" on page 9.
2 Remove the battery. See "Removing the Battery" on page 13.
3 Remove the module cover. See "Removing the Module Cover" on page 15.
4 Remove the optical-drive assembly. See "Removing the Optical Drive" on
5 Remove the keyboard. See "Removing the Keyboard" on page 31.