Battery, Removing the battery, Replacing the battery – Dell Studio 1745 (Mid 2009) User Manual
Page 50
Back to Contents Page
Battery
Dell Studio™ 1745/1747 Service Manual
Removing the Battery
1.
Shut down the computer and turn it over.
2.
Slide the battery release latch until it clicks into place.
3.
Slide the battery out of the battery bay.
Replacing the Battery
Slide the battery into the battery bay until it clicks into place.
Back to Contents Page
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To avoid damage to the computer, use only the battery designed for this particular Dell computer. Do not use batteries designed for
other Dell computers.
1
battery
2
battery release latch