Dell Studio 1745 (Mid 2009) - Manual (Page 25)

5. Connect the display cable, camera cable, and power button cable to the respective system board connectors.
6. Replace the screw that secures the display cable to the computer base.
7. Replace the media controls board (see Replacing the Media Controls Board ).
8. Replace the keyboard (see Replacing the Keyboard ).
9. Replace the center control cover (see Replacing the Center Control Cover ).
10. Replace the two screws at the bottom of the computer.
11. Connect the subwoofer assembly cable to the subwoofer assembly cable connector on the system board.
12. Connect the antenna cables to the Mini-Card(s) (see Replacing the Mini-Card ).
13. Replace the base cover (see Replacing the Base Cover ).
14. Replace the battery (see Replacing the Battery ).
Display Bezel
Removing the Display Bezel
1. Follow the procedures in Before You Begin .
2. Remove the display assembly (see Removing the Display Assembly ).
3. Using your fingertips, carefully pry up the inside edge of the display bezel.
4. Remove the display bezel.
Replacing the Display Bezel
1. Follow the procedures in Before You Begin .
2. Realign the display bezel over the display panel, and gently snap into place.
3. Replace the display assembly (see Replacing the Display Assembly ).
CAUTION: The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
1 display bezel