Dell Studio XPS 8000 (Late 2009) - Manual (Page 25)

6. Slide the FlexDock out through the front of the computer.
Replacing the FlexDock
1. Follow the procedures in Before You Begin .
2. If this is the first time you are installing the FlexDock:
a. Align the tip of a Phillips screwdriver with the breakaway metal plate slot on the front panel and rotate the screwdriver outwards to remove the
breakaway metal plate.
b. Remove the filler bracket on the front bezel, if applicable (see Removing the Filler Bracket )
NOTE: If you are not replacing the FlexDock at this time, replace the filler bracket (see Replacing the Filler Bracket ).
1 drive panel 2 screws (2)
3 FlexDock 4 FlexDock USB cable