Dell Studio XPS 8100 (Late 2009) - Manual (Page 43)

Processor Cache L1 Displays the processor L1 cache size
Processor Cache L2 Displays the processor L2 cache size
Processor Cache L3 Displays the processor L3 cache size
Memory Installed Indicates the amount of installed memory in MB
Memory Available Indicates the amount of memory available in MB
Memory Speed Indicates the memory speed in MHz.
Memory Technology Indicates the memory technology; DDR3
Standard CMOS Features
System Time Displays the current time in hh:mm:ss format
System Date Displays the current date in mm:dd:yy format
SATA1 Displays the SATA1 drive integrated in the computer
SATA2 Displays the SATA2 drive integrated in the computer
SATA3 Displays the SATA3 drive integrated in the computer.
SATA4 Displays the SATA4 drive integrated in the computer
eSATA Displays the eSATA drive integrated in the computer
Advanced BIOS Features
CPU Feature l Hyper-Threading — Enabled or Disabled (Enabled by default)
l Intel SpeedStep™ Tech — Enabled or Disabled (Enabled by default)
l Intel ® C-STATE Tech — Enabled or Disabled (Enabled by default)
l Intel ® Virtualization Tech — Enabled or Disabled (Enabled by default)
l Limit CPUID Value — Enabled or Disabled (Disabled by default)
l CPU XD Support — Enabled or Disabled (Enabled by default)
l Multi Core Support — All or 1 or 2 (All by default)
USB Device Setting l USB Controller — Enabled or Disabled (Enabled by default)
l USB Operation Mode — High Speed; Full/Low Speed (High Speed by default)
Advanced Chipset Features
Onboard Audio Controller Enabled or Disabled (Enabled by default)
SATA Mode ATA/RAID (RAID by default)
Onboard LAN Controller Enabled or Disabled (Enabled by default)
Onboard LAN Boot ROM Enabled or Disabled (Disabled by default)
Onboard 1394 Controller Enabled or Disabled (Enabled by default)
Memory Remap feature Enabled or Disabled (Enabled by default)
Boot Device Configuration
Boot Settings Configuration Configures the settings during system boot.
Hard Disk Boot Priority Sets the hard drive boot priority. The items displayed are dynamically updated according to the hard drives detected
1st Boot Device Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (Removable by default)
2nd Boot Device Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (CD/DVD by default)
3rd Boot Device Specifies the boot sequence from the available devices
Removable; CD/DVD; Hard Drive; Disabled (Hard Drive by default).
Boot Other Device No; Yes (Yes by default)
Power Management Setup
ACPI Suspend Type Specifies the ACPI suspend type. The default is S3
Remote Wake Up This option turns on the computer when you try to access the computer through the LAN (Enabled by default)
AC Recovery Specifies the behavior of the computer after recovering from a power loss (Off by default)
l On — The computer turns on after it recovers from a power failure
l Off — The computer remains off.
l Last — The computer returns to the power state it was in before the power failure