Dell PowerVault MD1200 - Manual (Page 27)

Installing Enclosure Components
27
Installing Enclosure Components
Recommended Tools
You may need the following items to perform the procedures in this section:
• Key to the system keylock
• #2 Phillips screwdriver
• Wrist grounding strap
Front Bezel (Optional)
Removing the Front Bezel
1 Using the system key, unlock the front bezel (if locked).
2 Lift up the release latch next to the keylock.
3 Rotate the left end of the bezel away from the front panel.
4 Unhook the right end of the bezel and pull the bezel away from
the system.
book.book Page 27 Monday, December 7, 2009 4:51 PM