Chamberlain 1215EM FS2 User Manual
Owner’s manual, Garage door opener
The Chamberlain Group, Inc.
845 Larch Avenue
Elmhurst, Illinois 60126-1196
Owner’s Manual
■
Please read this manual and the enclosed safety materials carefully!
■
Fasten the manual near the garage door after installation.
■
Periodic checks of the opener are required to ensure safe operation.
■
The model number label is located on the front panel of your opener.
®
GARAGE DOOR OPENER
For Residential Use Only
Model 1215EM FS2
Model 1225EM FS2
Table of contents
Document Outline
- OWNER'S MANUAL
- TABLE OF CONTENTS
- INTRODUCTION
- ASSEMBLY
- STEP 1 For Sectional and One-Piece Doors ONLY Assemble the Rail and Attach the Chain Pulley Bracket
- STEP 1 For Sliding and Swinging Gates ONLY Assemble the Rail and Attach the Chain Pulley Bracket
- STEP 2 For Sectional and One-Piece Doors Only Install the Trolley
- STEP 2 For Sliding and Swinging Gates Only Install the Trolley
- STEP 3 Fasten the Rail to the Motor Unit
- STEP 4 For Sectional and One-Piece Doors Only Install the Chain and Attach the Sprocket Cover
- STEP 4 For Sliding and Swinging Gates Only Install the Chain and Attach the Sprocket Cover
- STEP 5 Tighten the Chain
- INSTALLATION
- STEP 1 Determine the Header Bracket Location
- STEP 2 Install the Header Bracket
- STEP 3 Attach the Rail to the Header Bracket
- STEP 4 Position the Opener
- STEP 5 Hang the Opener
- STEP 6 Install the Door Control
- STEP 7 Install the Lights
- STEP 8 Attach the Emergency Release Rope and Handle
- STEP 9 Electrical Requirements
- STEP 10 Fasten the Door Bracket
- STEP 11 Connect Door Arm to Trolley
- ADJUSTMENT
- OPERATION
- PROGRAMMING
- ACCESSORIES
- LIFTMASTER® SERVICE IS ON CALL
- HOW TO ORDER REPAIR PARTS
- WARRANTY
- SPANISH