Dell OptiPlex 380 (Late 2009) - Manual (Page 35)

Back to Contents Page
Power Supply
Dell™ OptiPlex™ 380 Service Manual— Small Form Factor
Removing the Power Supply
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the optical drive .
3. Disconnect the processor power cable from the system board.
4. Remove the processor power cable from its routing guides on the chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.