Dell OptiPlex 380 (Late 2009) - Manual (Page 30)

Back to Contents Page
Memory
Dell™ OptiPlex™ 380 Service Manual— Small Form Factor
Removing the Memory Module(s)
1. Follow the procedures in Before Working Inside Your Computer .
2. Push down on the memory retention clips to release the memory module.
3. Lift the memory module out its connector on the system board and remove it from the computer.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.