Dell OptiPlex 380 (Late 2009) - Manual (Page 25)

Back to Contents Page
Heat Sink and Processor
Dell™ OptiPlex™ 380 Service Manual— Small Form Factor
Removing the Heat Sink and Processor
1. Follow the procedures in Before Working Inside Your Computer .
2. Loosen the screws that secure the heat sink to the system board.
3. Rotate the heat sink towards the back of the computer and remove the heat sink.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.