Campbell Hausfeld BUILT TO LAST PW3002 - Manual (Page 5)

UNPACKING
Remove the equipment and all parts from
the carton. The carton should contain the
following.
• One pressure washer (pump, engine,
cart base)
• One cart handle assembly
• One detergent tank
• One spray gun
• One lance
• One tip holder with 3 spray tips.
Additional tips available for purchase,
see Page 14.
• One high pressure hose
• One pack of nuts, bolts, and manuals
• One bottle of engine oil
If any parts are missing, DO NOT RETURN THE UNIT TO THE
RETAILER. Know the unit’s model number (located on the
serial number tag on the pressure washer frame) and call 1-
800-330-0712 for replacement parts.
After unpacking the product, inspect it carefully for any
damage that may have occurred during transit. Make sure to
tighten fittings and bolts before using the pressure washer.
Do not operate the unit if it’s
damaged during shipping,
handling, or use. Damage could result in bursting and cause
injury or property damage.
ASSEMBLY
Use two adjustable or 7/16” wrenches to assemble the
pressure washer.
1. Slide the handle assembly over the lower legs of the cart
base. Use the supplied nuts and bolts to secure the handle
to the legs. See Figure 1.
2. Attach detergent tank to backside of handle. Use the 4 hex
bolts with flat washer under hex head and 4 nuts provided.
3. Slide clear plastic hose attached to leg onto plastic hose barb
of detergent tank (see Figure 3).
4. Brass Swivel Adaptor (See Figure 2). If it’s not already
attached to the pump inlet, assemble the brass swivel adapter
and attach it to the pump inlet (See Figure 4 and Figure 5). Be
sure to connect the correct side of the brass swivel adapter to
the pump.
5. Secure garden hose (not included) to the inlet connection
on pump.
Pressure Washer
5
Pre-Operation
Figure 1 – Assemble Handle
Figure 3 – Attach suction tube to barb
fitting
Figure 4 - Brass swivel adapter
Connect this end to garden hose
Connect this end to pump
Washer
Washer
with filter
screen
Figure 5 - Connect the brass swivel to
the pump
Brass swivel adapter
Pump inlet
Figure 2 - Pump hook up
Garden hose
Pump inlet
Pump
outlet
Chemical injector
hose barb
Thermal
relief valve
www.chpower.com